Mibo Tile Tattoos Instructions
Clean the tiles you wish to cover using a non-abrasive cleanser.
Moisten the designated tiles with a few drops of water. A
few squirts from a small spray bottle work nicely.
Peel off the decal’s protective backing and spray or dabble on a few drops of water.
Align Tile Tattoo with the top of the tile. Adjust as needed then press firmly with a straight edge tool (a credit card works perfectly) from top to bottom, carefully pushing out any air bubbles.
If necessary, use a wet window squeegee to push out excess water or air bubbles.
Run the squeegee or a fingertip over the edges a final time to ensure adhesion.
Allow 24-48 hours to dry. If decals are installed in a shower, you may use the shower on the same day as the installation but be careful not to wet the decals.
Clean the tile tattoos with a solution of water and dishwashing liquid. Please do not use abrasive kitchen or bathroom cleaner.
This product is designed for use in kitchens and bathrooms and will withstand steamy and wet environments. It is not for use near direct open heat, such as a stove top, or on surfaces that are directly submersed in water, such as a tub floor. This is not a child’s product.